• Turn off water while you are brushing your teeth and open it when you need to rinse your mouth.
• Take shallow baths and plug the drain before you run water. Keep showers short with pressure at low force. Re-use bath water to water your lawn or shrubs or for heavy cleaning jobs like floors or cars.
Take shorter showers. Replace you showerhead with an ultra-low-flow version. Some units are available that allow you to cut off the flow without adjusting the water temperature knobs. • Use the minimum amount of water needed for a bath by closing the drain first and filling the bath only 1/3 full. Stopper bath before turning water. The initial burst of cold water can be warmed by adding hot water later. • Don't let water run while shaving or washing your face. Brush your teeth first while waiting for water to get hot, then wash or shave after filling the basin. • Retrofit all wasteful household taps by installing aerators with flow restrictors. • Operate automatic dishwashers and clothes washers only when they are fully loaded or properly set the water level for the size of load you are using. • When washing dishes by hand, fill one sink or basin with soapy water. Quickly rinse under a slow-moving stream from the tap. • Store drinking water in the refrigerator rather than letting the tap run every time you want a cool glass of water. • Do not use running water to thaw meat or other frozen foods. Defrost food overnight in the refrigerator or by using the defrost setting on your microwave.
Water conservation in the home... 1. Check faucets and pipes for leaks A small drip from a worn faucet washer can waste 20 gallons of water per day. Larger leaks can waste hundreds of gallons.
2. Don't use the toilet as an ashtray or wastebasket Every time you flush a cigarette butt, facial tissue or other small bit of trash, five to seven gallons of water is wasted.
3. Check your toilets for leaks Put a little food coloring in your toilet tank. If, without flushing, the color begins to appear in the bowl within 30 minutes, you have a leak that should be repaired immediately. Most replacement parts are inexpensive and easy to install.
4. Use your water meter to check for hidden water leaks Read the house water meter before and after a two-hour period when no water is being used. If the meter does not read exactly the same, there is a leak.
Water Conservation Methods / For the Household
ReplyDelete• Turn off water while you are brushing your teeth and open it when you need to rinse your mouth.
• Take shallow baths and plug the drain before you run water. Keep showers short with pressure at low force. Re-use bath water to water your lawn or shrubs or for heavy cleaning jobs like floors or cars.
Take shorter showers. Replace you showerhead with an ultra-low-flow version. Some units are available that allow you to cut off the flow without adjusting the water temperature knobs.
ReplyDelete• Use the minimum amount of water needed for a bath by closing the drain first and filling the bath only 1/3 full. Stopper bath before turning water. The initial burst of cold water can be warmed by adding hot water later.
• Don't let water run while shaving or washing your face. Brush your teeth first while waiting for water to get hot, then wash or shave after filling the basin.
• Retrofit all wasteful household taps by installing aerators with flow restrictors.
• Operate automatic dishwashers and clothes washers only when they are fully loaded or properly set the water level for the size of load you are using.
• When washing dishes by hand, fill one sink or basin with soapy water. Quickly rinse under a slow-moving stream from the tap.
• Store drinking water in the refrigerator rather than letting the tap run every time you want a cool glass of water.
• Do not use running water to thaw meat or other frozen foods. Defrost food overnight in the refrigerator or by using the defrost setting on your microwave.
Water conservation in the home...
ReplyDelete1. Check faucets and pipes for leaks
A small drip from a worn faucet washer can waste 20 gallons of water per day. Larger leaks can waste hundreds of gallons.
2. Don't use the toilet as an ashtray or wastebasket
Every time you flush a cigarette butt, facial tissue or other small bit of trash, five to seven gallons of water is wasted.
3. Check your toilets for leaks
Put a little food coloring in your toilet tank. If, without flushing, the color begins to appear in the bowl within 30 minutes, you have a leak that should be repaired immediately. Most replacement parts are inexpensive and easy to install.
4. Use your water meter to check for hidden water leaks
Read the house water meter before and after a two-hour period when no water is being used. If the meter does not read exactly the same, there is a leak.
Useful methods to conserve water at home.
ReplyDeleteThis is very useful for everyone to conserve water and our environment.
ReplyDeleteGood work Priya. Keep it up.